Sign In

milwaukee

Products Saad H. Abukhadra & Co. Waterproofing & Sealers
Waterproofing and Sealers
Chem-Seal 17
Chem-Seal 17 is a two component low viscosity, solvented-epoxy clear sealer and primer for concrete substrate.

Product Estimation Calculator

Enter the Area to be sealed & primed: m²
Chem-Seal 17 Quantity Needed @ 35 kg/pack: Kg Pail
Download Info:
Acrylic Sealer
Acrylic Sealer is a one component, low viscosity, and acrylic polymer emulsion. It is a milky white acrylic, which dries clear on substrates sealing the pores on that surface. Acrylic Sealer is a film forming product and a sealer for minerals under the surface.

Product Estimation Calculator

Enter the Area to be sealed: m²
Acrylic Sealer Quantity Needed @ 17 lit/pail: Kg Pail
Download Info:
Chem-Proof 100
Chem-Proof 100 is a heavy-duty general-purpose damp proof emulsion coating. It is specially formulated to provide high water vapor permeability with high resistance to re-emulsification upon long-term contact with water. It is designed to protect concrete structures in subsoil environment.		 Download Info:
Chem-Crete CCC1000
Chem-Crete CCC1000 is a ready-to-use, clear, deep penetrating, water based liquid concrete sealer and water repellent. Chem-Crete CCC1000 is a colorless, non-staining, non-film forming and non-yellowing material.

Product Estimation Calculator

Enter the Area to be sealed: m²
Chem-Crete CCC1000 Quantity Needed @ 17lit
White or buff color concrete: lit Pail
Lime stone: lit Pail
Slump block: lit Pail
Pre-cast and poured concrete: lit Pail
Brick: lit Pail
Stucco: lit Pail
Plaster: lit Pail
Stone-tile: lit Pail
Download Info:
CHEM-CRETE CCC1000S
Chem-Crete CCC1000S is a ready-to-use, clear, deep penetrating, non-yellowing, non-film forming, water based liquid designed to impart water repellency to a wide variety of surfaces.

Product Estimation Calculator

Enter the Area to be sealed: m²
Chem-Crete CCC1000S Quantity Needed @ 17lit
White or buff color concrete: lit Pail
Lime stone: lit Pail
Slump block: lit Pail
Pre-cast and poured concrete: lit Pail
Brick: lit Pail
Stucco: lit Pail
Plaster: lit Pail
Stone-tile: lit Pail
Download Info:
Chem-Crete CCC5000
Chem-Crete CCC5000 is a single-component clear penetrating and waterproofing sealer, for protection of above grade stucco, masonry, concrete, brick, sandstone and wood.

Product Estimation Calculator

Enter the Area to be sealed: m²
Chem-Crete CCC5000 Quantity Needed @ 17lit
Brick: lit Pail
Concrete: lit Pail
Smooth Concrete block: lit Pail
Clay Tile: lit Pail
Quarry Tile: lit Pail
Stucco: lit Pail
State-Masonite: lit Pail
Wood:Rough lit Pail
Wood:Smooth lit Pail
Plywood: lit Pail
Wood Shingles: lit Pail
Download Info:
Chem-Crete CCC5000-1
Chem-Crete CCC5000-1 is a single-component Silane/ Siloxane clear penetrating and waterproofing sealer, for protection of masonry, concrete, brick, and sand stone.


Product Estimation Calculator

Enter the Area to be sealed: m²
Chem-Crete CCC5000-1 Quantity Needed @ 17lit
Brick: lit Pail
Concrete: lit Pail
Smooth Concrete block: lit Pail
Clay Tile: lit Pail
Quarry Tile: lit Pail
Stucco: lit Pail
State-Masonite: lit Pail
Wood:Rough lit Pail
Wood:Smooth lit Pail
Plywood: lit Pail
Wood Shingles: lit Pail
Download Info:
Chem-Crete CCC100
Chem-Crete CCC100 original formula is a one component, colorless and transparent low viscosity liquid. Chem-Crete CCC100 has a specially designed catalyst with numerous enzymes, which allows it to penetrate effectively into concrete and cementitious structures chemically reacting with the free alkali content within the pores of the structures and transforming it into a new aero-silica gel.

Product Estimation Calculator

Enter the Area to be sealed: m²
Chem-Crete CCC100 Quantity Needed @ 17lit
Adobe brick: lit Pail
Concrete block, light weight smooth face: lit Pail
Concrete block, light weight split face scored or fluted: lit Pail
Concrete block, light weight slump stone: lit Pail
Brick common smooth surface: lit Pail
Brick nice cut porous surface: lit Pail
Concrete precast poured in place trowel finish: lit Pail
Concrete sand blast, etched, exposed aggregate: lit Pail
Clay tile - Quarry tile: lit Pail
Stucco
(Made test for discoloration 3 FOG coats at 24 hour interval):		 lit Pail
Lime stone-Arch white concrete: lit Pail
Grout (Smooth surface): lit Pail
In general, two coats of Chem-Crete CCC100 can be estimated at the following coverage
1- First Coat @ 4.65 m²/kg
2- Second Coat @ 7.00 m²/kg
Download Info:
Chem-Crete PAVIX
Chem-Crete PAVIX is a unique water-based chemical product for the ultimate treatment and permanent protection of large-scale concrete substrates against temperature and moisture associated problems such as thermal cracking, damage caused by repeated freeze and thaw cycles, chloride ion penetration, as well as alkali silica reactions. Chem-Crete PAVIX keeps treated concrete reasonably dry, thus eliminates all water and moisture associated problems. Chem-Crete PAVIX provides three effective mechanisms for concrete protection in all weather conditions by formation of two types of crystals in addition to moisture repellency action. In the presence of water, one type of the crystals present in the product swells, therefore, blocking the pores completely. The second type of crystals absorbs the extra moisture on the surface of the first crystal preventing surface moisture on that crystal from diffusion to the concrete. These hygroscopic and hydrophilic properties provide double and durable protection against moisture penetration in concrete.

Product Estimation Calculator

Enter the Area to be waterproofed: m²
Chem-Crete Pavix Quantity Needed @ 200 lit/Barrel: lit Barrel
Download Info:
Chem-Crete ASP
Chem-Crete ASP is a solvent-based penetrating sealer and internal treatment for asphalt pavements. It is engineered using a special blend of oxidized asphalt binder that is UV stable and very rich in its aromatic compounds and modified with several moisture- insensitive silicone-based compounds that have multifunctional active groups.		 Download Info:
Chem-Cretex
Chem-Cretex is a one component, crystalline capillary waterproofing system composed of Portland cement, silica sand and many active chemicals. In the presence of moisture, the active chemicals in Cretex-C penetrate concrete and react chemically with free lime to produce insoluble crystals. This crystalline growth reduces porosity by blocking capillaries and filling hairline non-structural cracks up to (0.3 mm caused by shrinkage or expansion.

Product Estimation Calculator

Dry Shake on freshly poored concrete
Chem-Cretex Maximum Quantity Needed		 0.7 to 1.35 kg/m²
Slurry coat using brush or roller application
Chem-Cretex Maximum Quantity Needed
1 part water to 2.5 part of Chem-Cretex		 0.9 to 1.35 kg/m²
Slurry coat using spray technique
Chem-Cretex Quantity Needed
3 part water to 5 part of Chem-Cretex		 Approximately 0.9 kg/m²
Download Info:
CCC 150
CCC 150 is a one component Portland Cement based with an acrylic additive, brush applied waterproof coating system for concrete and masonry surfaces. CCC 150 is formulated similar to concrete, and becomes an integral part of the wall when properly applied, to give a uniform color and finish of the concrete substrate.CCC 150 produces a textured finish, provides a decorative protection to the surface, which fills and seals the pores, voids and allows the substrate to breathe.

Product Estimation Calculator

Enter the Area to be waterproofed: m²
CCC 150 Quantity Needed for 2 coats: Kg Bag
EB 550 SBR : lit
Water:
Download Info:
CMX-COAT CCC900
CMX-COAT CCC900 is a two-component, thixotropic, cementitious acrylic modified flexible coating system with a high-adhesion to concrete, masonry and steel. CMX-COAT forms a hard, highly alkaline waterproof coating with a degree of elasticity, which protects the concrete or other substrates from the effect of aggressive acid gases, moisture and chlorides. CMX-COAT has good chemical resistance to gasoline, diesel oil, sodium hydroxide, calcium chloride and sewage.

Product Estimation Calculator

Enter the Area to be waterproofed: m²x2 mm
CMX-COAT CCC900 Quantity Needed: Kg pack a+b
Download Info:
ER COAT 550
ER COAT 550 is a one component, elastomeric roof coating based on acrylic co-polymer for the protection of roofing. The coating system cures on exposure to atmosphere and forms a seamless membrane, which provides excellent flexibility, durability and weather resistance.

Product Estimation Calculator

Enter the Area to be waterproofed: m²x550 µ
ER COAT 550 Quantity Needed: Kg pail
Download Info:
ER COAT 550 AC
ER COAT 550 AC is a one component, elastomeric coating system based on acrylic co-polymer for the protection of concrete against carbonation and chloride ion diffusion. The coating system cures on exposure to atmosphere and forms a seamless membrane, which provides excellent flexibility, durability and weather resistance.

Product Estimation Calculator

Enter the Area to be waterproofed: m²x550 µ
ER COAT 550 AC Quantity Needed: Kg pail
Download Info:
Chem-Crete E-430
Chem-Crete E-430 is a two component ready-to-use, high build solvent-free epoxy resin based coating system. The two components are formulated the hardener is pigmented. Chem-Crete E-430 is a decorative, waterproofing and protective high build epoxy coating specially formulated to meet the 'in service' protection of concrete and steel.

Product Estimation Calculator

Enter the Area to be waterproofed: m²x400 µ
Chem-Crete E-430 White Quantity Needed : Kg pack a+b
Chem-Crete E-430 Blue Quantity Needed: Kg pack a+b
Download Info: