Sign In

milwaukee

Grouts and Injections
CEM 530 Cementitious Tile Grout
CEM 530 is a one-component polymer modified, cementitious, ready-to-use tile grout composed of cement, special fillers, proprietary chemicals and high quality pigments. It is extensively used for the grouting of tile joint widths from 2mm up to 12mm.


Product Estimation Calculator

Mixed with water
Enter the Area to be Tiled:
Enter the Ttle Length:
Enter the Ttle Width:
Enter the Joint Width:
Enter the Joint Depth:

mm
mm
mm
mm
Quantity of CEM 530 Needed: Kg Bags
Mixed with water
Enter the Area to be Tiled:
Enter the Ttle Length:
Enter the Ttle Width:
Enter the Joint Width:
Enter the Joint Depth:

mm
mm
mm
mm
Quantity of CEM 530 Needed: Kg Bags
Download Info:
CEM 650
CEM 650 is a ready-to-use, durable, non-metallic, flowable, high strength, cementitious and one component non-shrink grout. CEM 650 comprises of a balanced blend of washed and graded silica sands, finely crushed Portland cement, flow improvement compounds and an inorganic shrinkage compensation additive, which densifies the grout. CEM 650 inorganic shrinkage compensating additive completely fills the voids to make the mix dense, strong and stable grout. CEM 650 produces high early and ultimate strengths without intermediate and latent shrinkage. The inorganic shrinkage compensating additive works hardest between initial set and final set reducing normal grout tendencies to drying shrinkage. CEM 650 remains stable without failure from compressive loading, impact, lateral thrusts, high heat or continuous vibration.

Product Estimation Calculator

Enter the Area to be Repaired:
Enter the Thickness per layer:

mm
As 130% Flowable
CHEM-BOND 2 as Bonding Agent: Kg Pack a+b
CEM 650 Quantity Needed: Kg Bags
Water = 3.5 lit/bag: lit
Washed clean pea gravel 8-10 mm: Kg
As 250% Fluid
CHEM-BOND 2 as Bonding Agent: Kg Pack a+b
CEM 650 Quantity Needed: Kg Bags
Water = 4.5 lit/bag: lit
Washed clean pea gravel 8-10 mm: Kg
Download Info:
CEM 982
CEM 982 is a ready-to-use, durable, non-metallic, flowable, high strength, cementitious, one-component controlled expansive grout, with superior load stability. CEM 982 comprises of a balanced blend of washed and graded silica sands to promote knitting, high sulphate resistant cement, fluidity improvement compounds and an expansive additive to control shrinkage. This shrinkage additive guarantees controlled positive expansion in all directions. CEM 982 inorganic shrinkage compensating additive completely fills the voids to densify the mix to a strong and stable grout. CEM 982 produces an early high and ultimate strength without intermediate and latent shrinkage. The inorganic shrinkage compensating additive works hardest between initial set and final set reducing normal grout tendencies to drying shrinkage. The positive expansion of CEM 982 is consistent throughout the life of the grout.

Product Estimation Calculator

Enter the Area to be Repaired:
Enter the Thickness per layer:

mm
Plastic ASTM C-230 100%
CHEM-BOND 2 as Bonding Agent: Kg Pack a+b
CEM 982 Quantity Needed: Kg Bags
Water = 3.9 lit/bag: lit
Washed clean pea gravel 8-10 mm: Kg
Flowable ASTM C-230 100%
CHEM-BOND 2 as Bonding Agent: Kg Pack a+b
CEM 982 Quantity Needed: Kg Bags
Water = 4.2 lit/bag: lit
Washed clean pea gravel 8-10 mm: Kg
Fluid CRD-61 25-30 sec.
CHEM-BOND 2 as Bonding Agent: Kg Pack a+b
CEM 982 Quantity Needed: Kg Bags
Water = 5 lit/bag: lit
Washed clean pea gravel 8-10 mm: Kg
Download Info:
Chem-Poxy Grout E999
Chem-Poxy Grout E999 is solvent-free 100% solids, moisture-insensitive three component, ultra-low creep, pumpable, high flow and non-shrink epoxy grout system. It is formulated to be highly flowable for clearances down to 13mm.

Product Estimation Calculator

Enter the Area to be Repaired:
Enter the Thickness per layer:

mm
CHEM-Poxy Grout E999 Quantity Needed: Kg Pack a+b
Download Info:

Chem-Cast
Chem-Cast is a two component, 100% solids, high modulus, heavy-duty, and very low viscosity clear epoxy casting system. Chem-Cast is a fast setting casting and molding epoxy system. Chem-Cast has an excellent mechanical strength while maintaining the low viscosity of the system which makes it an easy pourable system. Chem-Cast cures well in the presence of moisture and form a strong bond to damp concrete as well as other structural materials.

Product Estimation Calculator

Coverage is estimated at 1.1 kg/cm³
Download Info:
Chem-Inject XLV 40
Chem-Inject XLV 40 is a two component, solvent-free, low viscosity, low modulus and non-pigmented epoxy resin based injection system. Both resin and hardener components are formulated. Ideal for sealing static cracks of widths even less than 200 microns. The product meets ASTM C-881.

Product Estimation Calculator

Coverage of 1 kg is estimated at 3.3 linear meter length of crack with 1 mm crack width and 30 cm concrete thickness.
Download Info:

Chem-Inject 100
Chem-Inject 100 is a two component, non-filled solvent-free, low viscosity and flexible epoxy injection resin. Both components are formulated to form a flexible and impermeable seal where limited movement of cracks in the concrete is anticipated.

Product Estimation Calculator

Coverage of 1 kg is estimated at 3 linear meter length of crack with 1 mm crack width and 30 cm concrete thickness.
Download Info:
Chem-Underwater Inject
Chem-Underwater Inject is a two component, ready-to-use, clear and solvent free epoxy injection resin system with a medium viscosity. Both the resin and hardener components are formulated and ideal for sealing static and live cracks, which are exposed to stresses of impact or changing temperatures. The product meets ASTM C-881, Type II, Grade I, Class B & C.

Product Estimation Calculator

Coverage of 1 kg is estimated at 3 linear meter length of crack with 1 mm crack width and 30 cm concrete thickness.
Download Info:
Chem-Crete Pipe Plug
Chem-Crete Pipe Plug is a solvent-free, two component and low viscosity polyurethane system. In contact with water, the grout expands and cures to a tough fiber filled, closed cell polyurethane foam that is essentially unaffected by corrosive environments.

Product Estimation Calculator

Consumption is variable and depends on application.
Download Info:
Chem-Crete ECO-110
Chem-Crete ECO-110 is a resin emulsion effective as an erosion control for both barren and vegetative surfaces.Chem-Crete ECO-110 will control erosion for the most severe of conditions and has been used on problem soils to control wind and water erosion complicated by sonic and vibratory attack. Chem-Crete ECO-110 has a very small micron size particle allowing for better polymer-to-soil cross-linking, stronger adhesive bonds, low percentage of bond rupture and a resilient, longer lasting crust.

Product Estimation Calculator

Solid Type Water Coverage
Hazardous Soil/Dust and Sand Control 1 to 5 parts 25 to 50 m²
Erodible Soil Types 10 to 15 parts 70 to 150 m²
Hazardous Soil/Dust and Sand Control 20 to 30 parts 150 to 260 m²
Download Info:

Chem-Crete Dry Oakum
Chem-Crete Dry Oakum is a dry, twisted JUTE Oakum made in rope form without tar or oil. Chem-Crete Dry Oakum is backed by laboratory and field research that has made it tops in quality, easy to handle and convenient to use.

Product Estimation Calculator

Consumption is variable and depends on application.
Download Info: